Monday, August 14, 2006

Day 4. Objective: Lay insulation. Start building the clay pot.

Not much progress this morning.

Once things dried off I put the insulation in the drum. There is a double layer in the bottom and a single layer on the sides. Hopefully the 13mm of insulation will keep enough of the heat in - I won't know until it's fired up for the first time. The insulation cuts very easily with a knife or scissors. I used a ventilation mask and latex gloves to do this.

There is a small tear in the top - the insulation is more fragile than I expected.

Then it started to rain again.


Post a Comment

<< Home